Industrial Market Products

Pages

No image

Retractable Conductor Line

Retractable Conductor Line

No image

SAMPS

Shore power for container, cruise ships

SAMPS

Cable management system for onshore power supply to ship on berth

Saturn Casting Rings Wabtec Corp Gerken SA

Saturn Casting Rings

Saturn is a division of Gerken SA, specialising in the design and manufacture of AccuRingTM billet casting rings for hot top and air casting moulds. The range was developed by veterans of the aluminium industry using Gerken’s graphite machining expertise.
 
Saturn’s high quality and precision help to reduce casting costs, increase life, increase casting recovery through consistent performance, predictable replacement in line with maintenance schedules and reduced scrap.

Screen Cloth Protectors

Longwood “Edge Guard” all-rubber stripping is designed to protect vibrating shaker screens in classifiers.

  • Increases shaker screen life by isolating metal-against-metal abrasion and absorbing the shock and noise of impact as materials fall on the screen and pass through.
  • Prevents excessive wear and noise from abrasion caused by screen cloth rubbing against the frame.
  • Easy installation reduces downtime.
  • The resiliency of rubber helps to secure the screen cloth firmly in place.

In addition to high resistance to abrasion, weathering and aging, Longwood’s “Extra Life” Screen Cloth Protector features an extra thick wear for long service life, and extra long “legs” for a firmer grip to prevent twisting or slipping during operation.
 
View Product Bulletin: https://wabtec.com/documents/7855/screen-cloth-protectors

Wabtec Industrial Products Screw Jack

Screw Jack

Electro-mechanical device for uplifting and positioning

Wabtec Corporation Industrial Products Sensor

Sensor

Electrical device for position detection

No image

Single Insulated Conductor Line

Single Insulated Conductor Line

Wabtec Industrial Products Slip Ring and brush assemblies

Slip Ring

Power, signal and data transmission on rotating equipment through centrally mounted rings and brush assemblies

Wabtec Industrial Products Slip Ring Assemblies

Slip Ring Assemblies

Slip ring assemblies for energy- and data transfer are being used for all products which do not allow any stationary current supply due to their rotary movement. 
 
Slip ring manufacturer - Made in Germany
 
Thus, the applications range from current transmission at slowly moving circular scrapers in purification plants to explosion-proof slip ring assemblies with media lead-through for oil production vessels and wind turbine slip rings.
 
Technologies
The slip ring assemblies and contact units for power and data transfers resp. signal technology are individually configured and manufactured for each requirement profile. We can resort to a wide range of standardised series and highly developed technologies, to implement the most ideal technical and economic solution for each customer. Even for complex requirements and extreme application conditions.
 
On this basis, these are manufactured according to the customers’ individual requirements for the respective purpose and adapted to the technical specifications and environment-related requirements.
 
We sustainably ensure the high quality of our solutions by means of the continuous further development of our products and the application of innovative technologies. Improved technologies lead to a better economic efficiency and functionality, for instance by means of smaller designs, higher capacities and longer lifecycles.
 
Standard Technologies

Series
Four platforms or standard modules form the basis for our slip ring assembly series; slip ring, contact unit, housing and electrical connection.  Each platform covers a large selection of different versions. Based on the customer's specifications we build the core components in detail in accordance with the special requirements.
 
The modular cross-platform concept offers a high level of flexibility for adjusting. So we are able to produce customer-specific slip ring assemblies to cost-effective terms and conditions − fast and individual, with high quality and cost-effective.

Catalogue Order
Slip ring assemblies – Survey
 
Product enquiry
Slip ring assemblies
 
For more information please view our website:
http://stemmann.com/en/products/slip_ring_assemblies

Wabtec Industrial Power Genration Products Slip Rings

Slip Rings

TransTech utilizes the sliprings of its sister company – Stemmann-Technik – when a rotating, sliding contact is needed to deliver electric power to moving machines. Slipring assemblies are used to provide uninterruptible energy and data transmission in all machines and equipment whose rotary motion does not permit fixed feed lines. We provide a variety of types of sliprings; cast, carbon/brass, carbon/carbon, printed circuit board, multiwire, and explosion proof.

Slip Rings Wind Turbine Wabtec Corp Gerken Group

Slip Rings

Slip rings for wind turbine applications - power and signal transfer, or for any rotary application where there is a need to transfer current.
 
From two-way units for high power transmission, to multi-way signal transfer, including gold wire systems, we can supply from our standard range or design a bespoke system - including complete assemblies in water or dustproof enclosures.

WAbtec Power Genreation Products Spearco Heat Exchanger

Spearco Heat Exchanger

Conventional intercooler cores are thin-walled, extruded aluminum tubes that are not designed to handle extreme boost pressures and limit cooling performance because of their narrow width. Spearco's W.A.V.E. Technology Cores (Wide Area Vane Effectiveness) utilize the latest design advances in strength and durability and maximize cooling effectiveness through a greater surface area. In addition to our selection of cast-aluminum manifolds which are used on a variety of cores, it is also possible to fabricate special manifolds from sheet and channel aluminum for special applications to fit all intercooler installation requirements and aid you in initial fit and function.

  • W.A.V.E. Technology cores provide greater efficiency. Bar & Plate design for rugged conditions and high boost pressures
  • Core construction process withstands high pressures (100+ psi)
  • Increase fuel economy by providing a denser air intake charge
  • Air to air and air to liquid internal and external vane designs help to lower inlet temperatures

No image

Spreader Cable Reel

Spreader Cable Reel

No image

Spring Cable Reels

Spring Cable Reels

No image

Spring Hose Reels

Spring Hose Reels

Wabtec Industrial Products Spring-Driven Cable Reels

Spring-Driven Cable Reels

Spring-Driven Cable Reels
Spring-Driven cable reels serve for an orderly winding on and of cables, hoses or ropes - mainly for cranes, stacking devices or in wastewater engineering. Driven by spiral leaf springs, they represent a cost-effective alternative to motor-driven cable reels - in particular for mobile equipment without an independent power supply.
For a flash request please follow this link: http://stemmann.com/en/products/cable_reels/spring_driven_cable_reels
 
Cable-reels supplier
STEMMANN-TECHNIK manufactures cylindrical or spiral spring-driven cable reels in accordance with customer requirements - usually with slip ring assemblies for power and data transmission and if necessary, also as hose reels with rotary joints for different media.
TLF 123 | TLF 190 | TLF 280 | TLF 300 | TLF 400 | TLF 500 | TLF 600
 
Industrial spring hose reels - Made in Germany
Many other names of spring-driven cable reels are used, including industrial hose reel, spring reel, air hose reel, cable guide, diverting unit and diverting roler.

Wabtec Industrial Products Stator Coils

Stator Coils

Swiger Coil offers form wound stator coils for medium voltage AC motors ranging from 450-7200 volts. We have several insulation systems to fit your specific needs, and can have a quote to you in under an hour. A large wire inventory allows us to have a quick turnaround and our same day shipping options mean we can have coils to you fast. For inquiries please send in a "Contact Us" form with your company's information.

No image

Stinger System

Train powering in depots

wabtec corp railroad Stinger System

Stinger System

Stinger System
Stinger systems serve the power supply of parked vehicles in maintenance areas, e.g. for battery charging or other maintenance work, which must be conducted under vehicle voltage. Furthermore, with our Stinger systems, the vehicles can be moved within the depot or maintenance facilities by means of a control console.  The connection terminals of our 3rd Rail Current Collectors can be used as Stinger terminals by installing an arbor.  We manufacture and install complete systems according to customer requirements including conductor lines, plug and wire connections, control systems and arbors on railway vehicles.
 
Stinger system components:

For more information please visit our website:  http://stemmann.com/en/products/stinger_systems

Pages